Phone Number Assignment; Storing Phone Number; Figure 19 At Command Example 1 - ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite User Manual

3.4.1 Phone Number Assignment

Enter AT!pS=<phone number> and press [ENTER] to assign the first phone number to
the PHONE 1 port.
Enter AT!pS=<phone number> and press [ENTER] to assign the second phone number to
the PHONE 2 port.

Figure 19 AT Command Example 1

3.4.2 Storing Phone Number

To store a phone number (1234567 for example) on the TA, use the AT-Zd=<phone
number> [/<sub-address>] command for data calls and the AT\Zd=<phone
number> [/<sub-address>] command for voice calls.
Chapter 3 Using AT Commands
Omni.Net Lite User's Guide
62