Call Reject; To Disconnect Caller C And Switch Back To Caller B; Call Transfer - ZyXEL Communications omni.net LCD+M Technical Reference

Repeat steps 1 and 2 above to switch back and forth between callers B and C.

Call Reject

The call reject option allows you to disconnect an active call and return to a call that is on hold
without having to hang up your handset.

To disconnect caller C and switch back to caller B

Pressing the Flash key and 5 to will automatically switch back to caller B while disconnecting
caller C.

Call Transfer

With this feature gives you the ability to transfer an incoming call to another local phone (connected
to the other POTS port of your omni.net).
Step 1. To transfer a call to the other local phone connected to your
omni.net, press the Flash key and 2.
Step 2. Hang up your handset and the other local phone will start
to ring.
Technical Reference for ZyXEL omni.net series
6-5