SurgeX DEFENDER Series User Manual page 7

a. Connect the MULTIPAK Data Interface Cable to your PC
b. Install the MULTIPAK Driver Files
© 2013 SurgeX / Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / surgex.com
i. Plug the USB end of the optional Data Cable into an
available USB port on your PC.
i. Automatic (requires Internet connection)
When you plug the USB into your PC, Windows will automatically detect the cable.
1. When the "Found New Hardware" pop-up box appears, be sure to select "Yes, this
time only" option for the device driver installation
2. This installation could take a few minutes to search and download the driver files.
Once the files are found, follow the on-screen instructions to install.
Please Note: The drivers will first install the USB serial converter and will then install
3.
the USB serial port drivers separately.
ii. Manual
In the event that the automatic driver installation does not function or there is no
Internet connection, select "Install Drivers" during the MULTIPAK Software Installation.
User Manual
Software Version 2.7
Page 6