Chapter 4 Network Settings; Fixed Ip - ZyXEL Communications ZyXEL Prestige 2000W User Manual

Use this chapter to configure your Prestige to access the Internet. The Prestige restarts when
you return to the main screen after changing the network settings.
If you were given a user name and password for Internet access, go to
If you were given an IP address and subnet mask, go to
If you were not given an IP address and subnet mask, go to

4.1 Fixed IP

With this option you have to manually enter an IP address, subnet mask and gateway IP
address. These are given to you by the network administrator.
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
2 Select Network Mode.
3 Select Fixed IP.
4 Select IP Address.

Chapter 4 Network Settings

Prestige 2000W_V2 User's Guide
C
H A P T E R
Network Settings
Section 4.1 on page
Section 4.2 on page
4
Section 4.3 on page 41.
39.
40.
4. Net Settings
5. SIP Settings
6. Settings
Select Back
1. Network Mode
2. IP Address
3. Subnet Mask
Select Back
[1] Fixed IP
[2] DHCP
[3] PPPoE
Select Back
2. IP Address
3. Subnet Mask
4. Gateway
Select Back
39