Deposit Cup; Fuel Filter; High Pressure Pump - Walter AGW-180E Operating Manual

Deposit cup

• Open the bleed screw (A) with the Phillips
screwdriver provided to drain any excess fuel
from the deposit cup.
• Unscrew the retaining bolt (B) with the 10mm
spanner provided and remove the deposit cup.
• Wipe out any debris or residue.
• Re-assemble in reverse order.

Fuel filter

• Remove the fuel filter form the top of the
tank, clean or replace if necessary.

High pressure pump

• To change the pump oil unscrew the oil
outlet screw, drain all pump oil and refit
the oil outlet screw.
• Refill with 70 – 80 ml of SAE10W-30 oil.
Do not overfill!
A
61
B