Filling The Petrol Tank - Walter AGW-180E Operating Manual

Oil specification
• Use high quality detergent motor oils classified SF, SG, SH, SJ or higher.
• Do not use additives.
• Outdoor temperatures influence the viscosity of the engine oil. Refer to chart below.
CAUTION
At temperatures below 4°C the use of SAE 30 oil may cause starting
difficulties.
At temperatures above 27°C the use of 10W-30 oil may cause increased oil
consumption. Check oil level more frequently.

Filling the petrol tank

• Petrol and its fumes are extremely flammable and potentially explosive.
• Fire or explosion can cause severe burns or death.
• The engine must be OFF when refilling the tank.
• Refill the tank away from all sources of direct or convectional heat.
• Refill the tank only in well ventilated areas.
• Let the petrol pressure washer cool down for at least two minutes before removing
the fuel cap.
• Remove all debris around the fuel cap and slowly remove the cap to allow any
pressure to escape.
• Do not overfill the tank.
• Do not smoke or allow flames or sparks where the petrol pressure washer is
refuelled or the fuel is stored.
°F
104
86
68
50
32
14
-4
-22
51
°C
40
30
20
10
0
-10
-20
-30