Filling The Cleaning Agent Tank - Walter AGW-180E Operating Manual

• Unscrew the fuel cap (F).
• Carefully fill the tank (E) with unleaded fuel.
Do not exceed the maximum capacity.
• Refer to the fuel level indicator fitted in the fuel
filter.
Fuel specification
• Use clean, fresh unleaded petrol min. 91 RON.
• Petrol with up to 10% ethanol content may be used but do not use E85 high ethanol
fuels.
• Do not mix the fuel with oil.
Never fill the tank without the fuel filter in place.

Filling the cleaning agent tank

• Switch the petrol pressure washer off before making adjustments or carrying
out maintenance work.
• This machine has been designed for use with the cleaning agent
recommended by the manufacturer. The use of other cleaning agents or
chemicals may adversely affect the safety of the machine.
• Recommended cleaning agents include detergents designed for use with
pressure washers and are widely available at DIY stores or car accessory
retailers.
• Only use non-abrasive, non-corrosive and non-toxic cleaning agents that
cannot damage the high pressure pump.
• Fit the black chemical nozzle (R) to the lance.
• Prepare the cleaning agent as instructed by its
manufacturer.
• Unscrew the cleaning agent tank cap (P).
• Carefully fill the cleaning agent tank. We
recommend using a funnel to avoid spillages.
52
F
E
P