Trigger Lock; Changing Nozzles - Walter AGW-180E Operating Manual

Trigger lock

To prevent unintentional starting always engage the trigger lock when putting
the gun aside.
• Lift the trigger lock (B) and lock it into the
handle.
• To disengage the trigger lock, push the
lock down into its original position.

Changing nozzles

• Switch the petrol pressure washer off before making adjustments or carrying
out maintenance work.
• To prevent unintentional starting always engage the trigger lock when putting
the gun aside.
• Maintain a firm grip on the lance in order to prevent whiplash when you
disconnect the quick-release connector.
The nozzles (R) and lance (H) are equipped with quick release connectors. Proceed as
follows to change the nozzles:
• Switch the petrol pressure washer off.
• Release remaining water pressure from the gun
by pulling the trigger.
• Engage the trigger lock as described above.
• Pull back the sleeve on the quick release
connector as pictured.
• Remove or fit the nozzle as required.
• VEnsure that the sleeve moves forward to its
original position.
• Ensure that the nozzle is engaged properly by
pulling to check.
53
B
R
H