Using The Petrol Pressure Washer; Starting/Stopping The Machine - Walter AGW-180E Operating Manual

The petrol pressure washer comes with five colour-coded spraying nozzles. The
nozzles are fitted to the hose compartment. They vary in spray patterns and emitted
water pressure.
0° nozzle – red:
Extremely powerful pinpoint jet, covers only a small area.
Do not use to clean wood!
15° nozzle – yellow:
Powerful 15° spray pattern for intense cleaning of small areas.
Only use on surfaces and materials that can withstand high pressure.
25° nozzle – green:
25° spray pattern for intense cleaning of larger areas.
40° nozzle – white:
40° spray pattern for general cleaning of large areas.
Chemical nozzle – black:
Low pressure spray pattern for application of cleaning agents.
Note! The spraying pattern angle is also marked on the plastic cap of each nozzle.

5. Using the petrol pressure washer

Starting/stopping the machine

Starting the machine
Never start or run the engine without a water supply connected. This will
damage the high pressure pump.
• Fit a nozzle to the lance as described
above.
• Connect the petrol pressure washer
to the water supply and turn the water
supply on.
• Slide the fuel tap (Z) to the open position.
• Slide the choke (Y) to the closed start
position.
Y
54
Z