Using The Spray Gun; Cleaning - Walter AGW-180E Operating Manual

Using the spray gun

High pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons or animals, live electrical equipment or the machine itself.
• Pull the trigger (B) to start the water flow through
the gun (C).
• Release the trigger to stop the water flow.

Cleaning

• Keep a distance of 30 cm when cleaning vehicle tyres or tyre valves. The high
pressure jet may cause damaged tyres or tyre valves to burst.
• Keep a distance of at least 30 cm when cleaning painted surfaces to avoid
damage to the paintwork.
• Maintain a stable posture and firmly grip the spray gun with both hands. Consider the
danger of the kickback force and the sudden torque on the spray gun when pulling the
trigger.
• Point the nozzle in a safe direction and pull the trigger to free the system from air and
debris.
• Direct the nozzle to the working surface. Move the nozzle closer to the surface to
increase pressure; move it away from the surface to decrease pressure.
• When finished, release the trigger.
Note! Slight leakage form the high pressure pump is normal. If the leakage increases
contact the service centre.
C
57
B