Removing Heater Assembly; Removing Drain Pump - Whirlpool M-17 Technical Manual

Removing Heater Assembly

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Locate the heater terminals at the bottom of the dishwasher.
Disconnect wires from both heater terminals.
3. Remove both heater element nuts.
B
C
A. Heater Element Assembly
B. Heater Washer
C. Heater Element Nut
4. Remove heater element assembly from tub.
A
Whirlpool and KitchenAid
®

Removing Drain Pump

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Uninstall dishwasher so that it can be pulled half way out of
cabinet.
3. Turn off water supply to dishwasher. Disconnect drain hose if
necessary. Unscrew anchors to cabinet.
4. Locate the drain pump in the lower front right of dishwasher.
5. Push in on tab and turn drain pump 1/4 turn
counterclockwise to remove.
6. Remove plastic wire harness connector retainer by pulling it
straight out. Push in on connector retainer and remove
harness.
Filtration and Maytag
® ®
COMPONENT ACCESS (Cont.)
WARNING
24" Microfiltration Dishwashers 4-15
n