Whirlpool M-17 Technical Manual page 82

COMPONENT ACCESS (Cont.)
Removing Sump and Motor Assembly (Continued)
5. Disconnect water supply under sink if necessary.
6. Disconnect drain hose under sink if necessary.
7. Disconnect electrical under sink or at junction box if needed.
8. Pull dishwasher out from under the counter and lay it on it's
back.
9. Move junction box out of the way by twisting up on left side
and pulling it up and away from the retaining bar.
10. To remove plastic drain pump bracket, use a standard
screwdriver to push down on tab and push bracket away from
you.
4-18 Whirlpool and KitchenAid
n
®
Filtration and Maytag
® ®
11. Remove black plastic hose retainer and disconnect drain hose
from drain pump port.
A. Drain Pump Port
B. Plastic Hose Retainer
D. Drain Pump Hose
12. Complete the steps 1-6
section.
13. Remove plastic screw/plug on the right side of the motor
bracket using a Phillips screwdriver.
24" Microfiltration Dishwashers
A
B
C
from "Removing Drain Pump"