Whirlpool M-17 Technical Manual page 69

4. Flip the ACU cover on door. Push up on the connector tab and
pull the harness connector off the board.
Accessing Door Components (Continued)
Whirlpool and KitchenAid
®
Remove ACU
5. To remove ACU, use a flat blade screwdriver to push in on
tab. Then lift up on ACU and slide to the left.
6. Turn the ACU assembly over and depress the three tabs to
release the wire harness connector cover. Disconnect wire
harness connectors and replace ACU.
Filtration and Maytag
® ®
COMPONENT ACCESS (Cont.)
24" Microfiltration Dishwashers 4-5
n