Remove Spray Arms
4. Pull spray arms away from Manifold Drive Box.
5. To remove Tube Hanger from the Tube Hanger Bracket push
Hanger in direction shown in below image:
Remove Roller Assembly
6. Using a flat blade screwdriver push in on the three tabs. Then
lift roller assembly up and away from rack.
Removing the Third Level Rack (Continued)
Whirlpool
and KitchenAid
®
Remove Spray Bar Cover
7. Use a flat blade screwdriver to pry four locking tabs to
remove spray bar cover.
Remove Spray Bar
8. Use a flat blade screwdriver to pry locking tab to remove
spray bar.
Filtration and Maytag
®
®
COMPONENT ACCESS (Cont.)
24" Microfiltration Dishwashers
4-13
n