Removing The Inner Door And Hinges - Whirlpool M-17 Technical Manual

COMPONENT ACCESS (Cont.)
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Removing the Inner Door
1. Unplug dishwasher or disconnect power.
2. Complete the step 1-4 from "Remove Outer Door Panel"
section.
3. Open the inner door slightly and insert 7/64" drill bits (or
Allen wrench's) into hinge hole as shown in below image:
This will keep the hinge slightly open and make replacing the
inner door easier.
4. Remove the two TORX T20 screws attaching the inner door
panel to the hinge and repeat for other hinge. Then lift up on
inner door to remove.
4-6 Whirlpool and KitchenAid
n
®

Removing the Inner Door and Hinges

Filtration and Maytag
®
Removing the Hinge
5. Using a 5/16" nut driver remove two rear screws and use
a 1/4" nut driver to remove the front two screws. Repeat the
step for other hinge.
24" Microfiltration Dishwashers
®