Water - Swegon ADAPT Parasol EXb Manual

ADAPT Parasol EXb

Water

Water connection
Valve kit installation
If the product is ordered with valve kits, these are supplied
connected to the regulator and temporarily attached
using cable ties.
• Cut the cable ties (A) and mount the valve kit on the
pipes for cooling return and heating return according
to the product variant in question.
• Mount the valve kit so that the actuators are aligned as
illustrated in the figure below.
 
Note that compression ring couplings
require support sleeves inside the pipes.
Connection sizes
Model Size
A: only Cooling 690, 1290
B: Cooling/Heating 690, 1290
A: only Cooling 690, 1290
B: Cooling/Heating 690, 1290
4
Swegon reserves the right to alter specifications.
utvändig gänga DN (1/2")
Supplied / Connected Connection
Actuator and valve Return
Actuator and valve Return
- Return
- Return
Placement of the valve kit on delivery
Air and water connections on side 2 (standard)
Air and water connections on side 4
Coupling type
DN15, male thread
DN15, male thread
Plain pipe 12 x 1.0 mm
Plain pipe 12 x 1.0 mm
01/09/2020
A
A
Connection Coupling type
Supply pipe Plain pipe 12 x 1.0 mm
Supply pipe Plain pipe 12 x 1.0 mm
Supply pipe Plain pipe 12 x 1.0 mm
Supply pipe Plain pipe 12 x 1.0 mm