Mitsubishi FREQROL-SF Troubleshooting Manual page 210

While observing the contents
of the data display area,
enter data to be changed.
(Example) To change the data
2 6 4 0 ,
to
in the order.
Check the contents being dis-
played in the setting area
and set the data by the fol-
lowing operation.
1) Depending on the contents of the setting area, data
setting operation is performed and the results are dis-
played in the data display are.
2) The data No. of the setting area is incremented by 1
and the cursor is positioned at the right end of the
However, after the last data No. is input,
2nd
no data No. appears and the cursor is positioned at
the right end of the first (
BASE SERVO
MENU