Table of Contents
Advertisement
(4) Setting pins
No.
Name
Bus interface
setting
* The parameter
PIN1
should be set
PIN2
at the same
time.
Up/down short-
circuit protec-
PIN3
tion time
setting
Converter check
PIN4
test pin
Analog speed
reference
selection
* The parameter
PIN5
should be set
at the same
time.
Control circuit
PIN6
check test pin
Current loop
PIN7
gain selection
PIN8
Setting
When the equipment is not linked to
the M300 series machine through the
bus.
When the equipment is linked to the
M300 series through the bus.
Sets an up/down shortcircuit pro-
tection time of a transistor.
If the setting is changed, the
transistor may be damaged.
sure that the setting conforms to
the order list.
Test pin for delivery test.
Do not insert the pin when operat-
ing the equipment.
When unipolarity type (0 to +lOV)
input is used:
If an offset voltage near 0 V
should be considered, the following
bipolarity type (-1OV to +lOV)
should be used.
Bipolarity type (-1OV to
is used:
Test pin for delivery test.
When 1A and 1B are shortcircuited,
the controller overheat alarm can
be canceled.
shortcircuited, the breaker trip
alarm can be canceled.
When the capacity of FR-SF is 5.5kW
to 15kW.
When the capacity of FR-SF is
(Currently not used)
Description
When 2A and 2B are
.
Make
Hide quick links:
Advertisement
Table of Contents
