Important Instructions On Use; Intended Use; Introduction - Bosch Rexroth GTM Series Project Planning Manual

Planetary Gearboxes
2

Important Instructions on Use

2.1

Intended Use

Introduction

DOK-GEAR**-GTM********-PR01-EN-P
Bosch Rexroth products are designed and manufactured using state-of-
the-art technology. Before they are delivered, they are checked for their
operationally safety.
The products may only be used as intended. If they are not used as
intended, situations may arise resulting in injuries to property and
persons.
Note: For damage caused by products not being used as intended,
Bosch Rexroth gives no warranty, assumes no liability, and will
not pay for any damages. Any risks resulting from the products
not being used as intended are the sole responsibility of the
user.
Before using Bosch Rexroth products, the following requirements must be
fulfilled so as to ensure that they are used as intended:
• Anyone handling one of the products in any manner must read and
understand the appropriate safety instructions and the intended use.
• Regarding hardware components, the product concerned must be left
in its original state, i.e. it is not permitted to modify it structurally.
Software products may not be decompiled; their source codes may not
be altered.
• Damaged or defective products may not be installed or put into
operation.
• It must be ensured that the products are installed according to the
instructions mentioned in the documentation.
Important Instructions on Use
2-1