Handling, Transport And Storage; Handling; Identifying The Goods; Name Plates - Bosch Rexroth GTM Series Project Planning Manual

Planetary Gearboxes
9

Handling, transport and storage

9.1

Handling

Identifying the Goods

Bar code label

Name plates

Gearbox
Delivery of a motor/-gearbox
combination
DOK-GEAR**-GTM********-PR01-EN-P
A single copy of the delivery note is enclosed to each delivery. The
Delivery
delivery note lists all components with their description and their
designations. If the contents are distributed among several parcels
(transport containers), this is noted on the delivery note, or it can be seen
from the freight bill.
The packaging of each gearbox, or motor/-gearbox combination has a bar
code label providing the following data:
• Description of the gearbox or motor/-gearbox combination
• Customer
• Delivery note number
• Consignment
The bar code label is provided for identification of the contents during
processing of the order.
The gearbox is delivered with a plate. The type label is attached to the
gearbox-housing.
Fig. 9-1: Sample of a GTM name plate
The motor is delivered with its own separate name plate. This name plate
is attached to the motor housing. In addition, a second name plate is
attached using double-side tape onto the original motor name plate. The
second name plate can be put where visible on the machine-, if the
original name plate on the motor be concealed by parts of the machine.
Handling, transport and storage
Planetary gearbox
MNR: R911123456
FD: 03W13
TYP: GTM075-NN1-004A03
SN: 123456-A12345 0A01
Ratio:
i 7 : 1
P.L.No. 12345678910
9-1
7260
123456
GG000001v01_en.EPS