Bosch Rexroth GTM Series Project Planning Manual page 70

10-6
Assembly
6. Reinsert the cap screws. To ensure an IP 65 sealed drive-system,
the cap screws (as described in step 2) have to be reinserted and
tightened with the specified torque.
Cap screws
DIN 908
M12x1,5
M16x1,5
Fig. 10-8: Tightening torque - cap screws
Fig. 10-9: Closing the mounting opening
Planetary Gearboxes
Tightening torque [Nm]
20
30
GG000007v01_en.EPS
DOK-GEAR**-GTM********-PR01-EN-P