Transport - Bosch Rexroth GTM Series Project Planning Manual

9-2
Handling, transport and storage
9.2

Transport

Gearbox
The type label is provided for
• identification of the motor
• procurement of spare parts in case of a failure,
• service information.
Note: The description of the motor is also stored in the feedback
memory.
The notes regarding handling, transport and storage printed on the
packaging must be observed - especially for delivery of complete motor/-
gearbox combinations.
Hochwertige Elektronik
Fragile Electronic
Vor Nässe schützen
nicht belasten
Do not apply load
Do not drop
Fig. 9-2: Sample notes for handling, transport and storage on the packaging
of a motor/-gearbox combination.
The gearboxes are typically delivered in recyclable cardboard boxes with
carton for shaped elements.
protection of the gearboxes during transport, the gearboxes are
additionally protected with special laminated plastic bags. Larger sizes are
delivered on pallets.
The GTM gearboxes are filled-for-life with lubrication and are ready for
use. The input and output are treated with anticorrosive coating. Remove
all the anticorrosive on the gearboxes before mounting them.
Damage
⇒ Do not clean the parts with compressed air. The
danger consists that overpressure within the gearbox
can occur which negatively influences the function
CAUTION
and lifetime of the gearbox.
Planetary Gearboxes
Achtung
Attention
Nicht werfen
Nicht kanten
Do not tip
Keep dry
To ensure the best possible corrosion
DOK-GEAR**-GTM********-PR01-EN-P
GL000002v01_en.EPS