Table of Contents
Advertisement
Appendix B
Front and Back Panels
The front panel of the ADSL Bridge modem looks like this:
The following table describes each light on the front panel.
Light Description
LAN
Lights when the ETHERNET jack of the modem is plugged
into the Ethernet port of a powered-up device. Blinks when
data is sent.
LINK
Blinks when the modem is performing its startup sequence.
Stays on solid when the unit has synched up with its ADSL
connection.
Note: If the light fails to switch from blinking to steady after a
minute or two, check with your ADSL provider that the ADSL
connection is activated, or refer to Appendix A:
Troubleshooting Tips on page 37.
PWR
Lights when the modem is plugged into a power source.
40
ADSL Bridge Modem User's Guide
Advertisement
Table of Contents
