Mac Os X - Zoom 0335-A 27337 User Manual

Macintosh TCP/IP Settings
How you configure your Macintosh computer's network settings
differs, depending on your Mac OS. For OS X, follow the
instructions below. Otherwise, go to page 17.

Mac OS X

1 1 1 1
From the Dock, choose System Preferences and then
Network to display the Network pane. (For OS X 3, you also
have to click the Configure button.)
2 2 2 2
Ensure that Automatic is selected from the Location list box.
3 3 3 3
Under the Show drop-down tab, choose Built-in Ethernet.
4 4 4 4
Under the TCP/IP tab, do the following, depending on your
situation:
! If you are logging into the Zoom Configuration
Manager: Ensure that Static is highlighted in the
Configure: list box, then select Manually. Enter the
values provided in the table below appears in the
appropriate fields.
For this value...
IP Address
Subnet Mask
Router
! If you are using dynamic IP addressing: Make sure that
Using DHCP is highlighted in the Configure: list box.
Do not enter anything into the DHCP Client ID field.
! If you are using a static IP address: Make sure that
Static is highlighted in the Configure: list box, then select
Manually. Enter the values provided to you by your
Internet service provider for IP Address:, Subnet Mask:,
Router:, and Domain Name Server:. (The last value may
be called DNS Servers:.)
16
Enter...
Any value between 10.0.0.4 and
10.0.0.20. For example, type 10.0.0.10.
255.255.255.0
10.0.0.2
ADSL Bridge Modem User's Guide