Table of Contents
Advertisement
To configure your ADSL Bridge modem to use a static
IP address
1 1 1 1
Before you can access the modem's interface, you must first
change your computer's TCP/IP settings to match the values
show in the table below.
For this value...
IP address
Subnet mask
Default gateway
Tip!
If do not know how to access your computer's TCP/IP
settings, see Chapter 3: Specifying TCP/IP Settings on
page 15.
2 2 2 2
Log into the Zoom Configuration Manager.
a a a a
Open your Web browser and, in its address bar, type
http://10.0.0.2, then press the Enter key on your
keyboard. (You do not need to have an Internet
connection established to be able to view the interface.)
Tip!
If you are using a Windows computer, a Zoom icon
should have been placed on your desktop when you
installed the software provided with the modem. Instead
of typing one of the addresses above in your Web browser,
you can double-click the Zoom icon.
b b b b
When prompted, type the following user name and
password in the appropriate boxes, then click OK. You
must enter them using lowercase letters.
User Name: admin
Password: zoomadsl
Chapter 2: Using Static IP Addressing
Enter...
Any value between 10.0.0.4 and
10.0.0.20. For example, type 10.0.0.10.
255.255.255.0
10.0.0.2
13
Advertisement
Table of Contents
