Rev/Dly (Reverb/Delay) Module - Zoom GFX-3 Operation Manual

Parameter 3
Adjusts the random waveform modulation rate.
TYPE 9: SLOW-A ( S S S S A A A A ) (Slow Attack)
This module provides a slowly rising response curve and a filter effect where the filter open/close action is controlled by picking.
Parameter 1
Adjusts the filter variable range. A setting of "10" results in slow attack
only.
Parameter 3
Adjusts the slow attack/filter rise rate.
TYPE 10: RING ( R R R R N N N N ) (Ring Modulator)
Produces a metallic sound.
Parameter 1
Adjusts the effect sound quality.
Parameter 3
Adjusts the modulation frequency. The tone changes according to the
frequency.
TYPE 11: PDL-PIT ( P P P P P P P P ) (Pedal Pitch)
This effect lets you vary the pitch in real time, using the expression pedal.
Parameter 1
Selects the pedal pitch type. (See Table 2)
[Table 2]
Pedal minimum value
COLOR MODE
UP
1 -100 cent
dn
Original sound only
UP
2 DOUBLING
dn
Detune + DRY
UP
3 0 cent
dn
+1 octave
UP 0 cent
4
dn -2 octaves

◆ REV/DLY (Reverb/Delay) module

This module comprises various spatial effects including reverb and delay.
TYPE 1: HALL ( H H H H L L L L )
This is a reverb effect which simulates the acoustics of a concert hall.
TYPE 2: ROOM ( R R R R M M M M )
This is a reverb effect which simulates the acoustics of a room.
TYPE 3: SPRING ( S S S S P P P P )
This is a reverb effect which simulates a spring type reverb machine.
* Parameters for TYPE 1 – 3 are the same.
Parameter 1
Adjusts reverb duration (reverb time).
ZOOM GFX-3
RATE
1 – 30
COLOR
0 – 10
TIME
1 – 30
COLOR
0 – 10
RATE
1 – 30
COLOR
1 – 8
Pedal maximum value
Original sound only
-100 cent
Detune + DRY
DOUBLING
+1 octave
0 cent
-2 octaves
0 cent
TIME
1 – 30
REV/DLY (Reverb/Delay) module
Parameter 4
Higher values result in a stronger effect character.
Parameter 2
Selects connection point of MOD module.
Parameter 4
Adjusts attack curve.
Parameter 2
Selects connection point of MOD module.
Parameter 4
Adjusts the balance between original sound and effect sound.
Parameter 2
Sets the pitch change direction.
Parameter 3
Adjusts effect tone.
Pedal minimum value
COLOR MODE
UP
5 -1 octave + DRY
dn
+1 octave + DRY
UP
6 -700 cent + DRY
dn
500 cent + DRY
UP
7 -∞ (0 Hz) + DRY
dn
+1 octave
UP -∞ (0 Hz) + DRY
8
dn +1 octave + DRY
Parameter 2
Adjusts effect tone.
RESO
0 – 10
POSI
AF, bF
CURVE
1 – 10
POSI
AF, bF
MIX
0 – 30
MODE
UP, dn
TONE
0 – 10
Pedal maximum value
+1 octave + DRY
-1 octave + DRY
500 cent + DRY
-700 cent + DRY
+1 octave
-∞ (0 Hz) + DRY
+1 octave + DRY
-∞ (0 Hz) + DRY
TONE
0 – 10
21