Modulation Module; Delay Module - Zoom G1U Operation Manual

Effect Types and Parameters
Combo & ZNR
C 0 C 9
Combination of ZNR with amp simulator that recreates the sound of a combo amp with closed-back cabinet.
The right-digit value controls ZNR sensitivity.
Bright Combo & ZNR
B 0 B 9
Combination of ZNR with amp simulator that recreates the sound of a bright combo amp with open-back
cabinet. The right-digit value controls ZNR sensitivity.
Stack & ZNR
S 0 S 9
Combination of ZNR with amp simulator that recreates the sound of a stack amp cabinet. The right-digit
value controls ZNR sensitivity.
n MODULATION module
MODULATION (Type&Prm1)
Selects the MODULATION module
effect type and controls parameter
1 at the same time.
Chorus
This effect mixes a variable pitch-shifted
C 1 C 9
component to the original signal. Higher
right-digit settings result in higher effect
sound mixing ratio.
Ensemble
This is a chorus ensemble with three-
E 1 E 9
dimensional movement. Higher right-digit
settings result in higher effect sound mixing
ratio.
Flanger
This effect produces a resonating and strongly
F 1 F 9
undulating sound. Higher right-digit settings
emphasize the characteristics of the effect.
Step
Special effect that changes the sound in a
S 1 S 9
staircase pattern. Higher right-digit settings
emphasize the characteristics of the effect.
Pitch Shift
This effect shifts the pitch of the original
P 1 P 9
sound up or down. Higher right-digit settings
increase the mixing ratio of the effect sound.
Mono Pitch
This is a monophonic pitch shifter (for
M 1 M 9
single-note playing) with reduced flutter.
Higher right-digit settings increase the
mixing ratio of the effect sound.
HPS
(Harmonized Pitch Shifter)
This is an intelligent pitch shifter that
automatically generates major scale
H 1 H 9
harmonies according to a preset key. Higher
right-digit settings increase the mixing ratio
of the effect sound.
24
RATE (Prm2)
Controls the value of parameter 2
of the MODULATION module. The
parameter action differs, depending
on the effect type.
Rate
1 5 0
Adjusts the modulation rate.
Rate
1 5 0
Adjusts the modulation rate.
Shift
2 1
D T
Sets the pitch shift amount in semitones. "dt"
1 1 2
results in a detune effect.
2 4
,
C C O
Key
D , D O
E F
,
F O G ,
Specifies the tonic for the scale used for
pitch shifting. The "o" symbol stands for #.
G O A ,
,
A O B
ZOOM G1u
Vibrato
This is an effect with automatic vibrato.
V 1 V 9
Higher right-digit settings emphasize the
vibrato intensity.
Pitch Bend
This effect allows using the expression pedal
B 1 B 9
to change the pitch in real time. Right-digit
settings select the pitch change type caused
by the expression pedal (see Table 1).
[Table 1]
Prm2=0 Prm2=1.0
Type&Prm1
Pedal fully raised Pedal fully depressed
(minimum) (maximum)
b1
0 cent +1 octave
b2
0 cent +2 octaves
b3
0 cent -100 cent
b4
0 cent -2 octaves
b5
0 cent -
Delay
This is a delay with a maximum setting of
D 1 D 9
2000 msec. Higher right-digit settings
increase the mixing ratio of the effect sound
and the feedback amount.
CombFilter
This effect uses the comb filter
characteristics generated by using fixed
1 9
modulation on the flanger as an equalizer.
Higher settings increase the mixing ratio of
the effect sound.
Air
This effect reproduces the ambience of a
A 1 A 9
room, to create spatial depth. Higher settings
increase the mixing ratio of the effect sound.
Phaser
This effect produces sound with a pulsating
1 4
character. The setting values change the type
of sound.
n DELAY module
DELAY (Type&Prm1)
Selects the DELAY module effect type and controls parameter 1 at the same time.
Delay
D 1 D 9
This is a delay with a maximum setting of 5000 msec. The right-digit setting values control the mixing ratio
of the effect sound and the feedback amount.
Tape Echo
T 1 T 9
This effect simulates a tape echo with a long delay time of up to 5000 msec. The right-digit setting values
control the mixing ratio of the effect sound and the feedback amount.
ZOOM G1u
Effect Types and Parameters
Rate
1 5 0
Adjusts the modulation rate.
Pedal Position
Sets the initial value for the pitch shift
amount (the value that is active when the
0 1 0
pedal is at rest). The original sound/effect
sound level balance also changes according
to the parameter 1 setting.
Prm2=0 Prm2=1.0
Type&Prm1
Pedal fully raised Pedal fully depressed
(minimum) (maximum)
b6
-1 octave + original sound +1 octave + original sound
b7
-700 cent + original sound +500 cent + original sound
b8
Doubling Detune + original sound
b9
- (0Hz) + original sound +1 octave + original sound
Time (Delay Time)
Sets the delay time. In the 10 – 1000
millisecond range, the adjustment is
1 2 0
performed in 10-msec steps (1 – 99, 1.0).
Above 1 second, the adjustment is performed
in 100-msec steps (1.1 – 2.0).
Frequency
Sets the frequency to be emphasized by the
1 5 0
filter. Higher settings shift the emphasized
frequency upwards.
Size
1 1 0
Sets the size of the simulated space. Higher
settings values make the space bigger.
Rate
1 5 0
Adjusts the modulation rate.
25