Delay/Reverb - Zoom G1on User Manual

DELAY/REVERB

Delay This long delay has a maximum length of 4000 ms.
Time
Page01
Sets the delay time.
HiDMP
Page02
Adjusts the treble attenuation of the
delay sound.
Tail
When ON, effect sound continues
Page03
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
CarbonDly This analog delay sound is a model of the MXR Carbon Copy.
DELAY
Sets the delay time.
Page01
The DELAY setting has no effect if
Sync is not set to OFF .
MOD
Page02
Turns modulation ON or OFF .
Tail
When ON, effect sound continues
Page03
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
TapeEcho This effect simulates a tape echo. Changing the "Time" parameter changes the pitch of the echoes.
Time
Page01
Sets the delay time.
HiDMP
Page02
Adjusts the treble attenuation of the
delay sound.
ReverseDL This reverse delay is a long delay with a maximum length of 2000 ms.
Time
Page01
Sets the delay time.
HiDMP
Page02
Adjusts the treble attenuation of the
delay sound.
Parameter1
1–4000 F .B
Adjusts the feedback amount.
0–10 P-P
S e t s d e l ay o u t p u t t o m o n o o r
pingpong.
OFF/ON
Parameter1
19 – 581 P REGEN
Adjusts the feedback amount.
OFF/ON WIDTH
Adjusts the width of the modulation. Sets modulation speed.
OFF/ON Sync
Activates tempo sync.
Parameter1
1–2000 P F .B
Adjusts the feedback amount.
0–10 Level
Adjusts the output level.
Parameter1
10–2000 F .B
Adjusts the feedback amount.
0–10 Level
Adjusts the output level.
14
Parameter2
0–100 P Mix
Adjusts the amount of effected
sound that is mixed with the original
sound.
MONO, P-P Level
Adjusts the output level.
Parameter2
0 –100 P MIX
Adjusts the amount of effected
sound that is mixed with the original
sound.
0 – 50 SPEED
OFF, – x8
Parameter2
0–100 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 P Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Parameter2
0–100 P Bal
Adjusts the balance between original
and effect sounds.
0–150 P Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Parameter3
0–100 P
0–150 P
Parameter3
0 –100 P
0 – 50
P
Parameter3
0–100 P
OFF/ON
Parameter3
0–100 P
OFF/ON