Turning On And Off The Effects Module; Using The Comparison Function - Zoom 9000 Operation Manual

Turning On and OFF Effect Modules in a Patch.
Each effect can be turned on or off independently for each of the patches.
· In the Edit mode, using the BANK DOWN/UP key(s) and the PATCH 1 to
4 keys, select the desired Effect Module to turn On or Off.
· Press the same key again to toggle that Effect On and Off..
This operation changes the on/off status of the selected Effect Module. The display
shows "OFF" when the Effect Module is turned off.

Using the Comparison Function

Pressing the BYPASS/TUNER key while editing the Patch toggles the 9000 between the
edited patch, and the same patch before editing (that of the last edit). This function is
called "Comparison."
The display changes as follows, and the parameter of the Patch to be edited now is set
back to the parameter before editing.
Displayed Items for Comparison
To set the 9000 back in the Edit mode, press the BYPASS/TUNER key again.
Helpful hint:
Using the Comparison function, a change of the overall effect when a parameter has been
changed can be checked with ease.
20