Basic Transmitter Display: Modulation Type; Secret Code Entry; Indication Of Time Overrun; Model-Type Icon, Info-Text, Name Entry - GRAUPNER mc-24 PROFI-ROM Manual

• You can nominate the position of a free selectable
switch that will tell you after switch-on if the
transmitter is in the "correct" flight phase for
example:
DV20 KATANA
Stoppuhr
Mod. 03 5:46h !Warnung!
Uwe Corbach Flugzeit
Akku 0:34h
10.8V
MOD FNK
• In the Heli-program you can be alerted by pop-up
window "warning" and "audible warning" tone that
the throttle control is too advanced:
MEGA STAR
Gas
Stoppuhr
Mod. 04 8:31h
zu
Uwe Corbach Flugzeit hoch!
Akku 0:54h
10.7V
MOD FNK

Basic transmitter display: Modulation type

If no additional flight phase timer is activated in the
lower field the transmitter modulation type will be
displayed in the field next to the GRAUPNER -Logo.

Secret code entry

The secret code is no longer visable.
Instead it is indicated with"****" (asterisks)

Indication of time overrun

In all countdown timers (Alarm timer) is now with
time overrun a new (inverse) symbol displayed in
the default display for more clarity.

Model-type Icon, Info-Text, Name entry

In the Codes 11 » Model select «, 12 » Copy/Erase «
and 14 » Suppress models « the model name is
displayed along with the relevant model type for
fixed wing and helicopter, with the graphic icon
:
0 00
or .
:
0 00
01 CUMULUS 97
02 Laser
SPCM20
03 DV20 KATANA 5:46h noch Testphase
04 MEGA STAR
RUN STOP
05 frei
0 1 2
Additionaly you have the choice in Code 21 » Base
setup model « (see Page 13), to enter a short (max.
15 characters) text note to every model memory.
:
0 00
The large table of symbols and characters makes
:
0 00 the composition easy.
SPCM20
RUN STOP
1:25h SPCM20,Kanal 70
2:45h PPM18,Kanal 75
8:31h Trimmg neu just
3 4 5 6 7 8 9
Control comfort and Control safety 5