Code 12; Copy/Erase; Store Changes Permanently; Back-Up All Models - GRAUPNER mc-24 PROFI-ROM Manual

Code 12

Copy/Erase

Copy function, saving of model data
Modell löschen
i ren Modell → Modell
Kop e
→
Kop e i ren M C24 extern
ern → MC24
Kop ieren ext
Kopieren Flugph ase
Änderungen fest schreiben
Ä derun en r ckgängig n g ü
Sichern alle Modelle→PC
The changes do not only consist in the three ew
entries: "Store changes permanently", "Und
changes" and "Back-up all models -> PC".
If you copy between two transmitters the ty
ROM used has to be taken into account.
W hen dat a i s c op ed the following is i
Transmitters are compatible if both are
MEGA-SOFT-ROM (Part.-Nr. 4832.660 or
SOFT-ROM as with multi-voice-audio-recor
modules (Part.-Nr. 4130) and transmitters
new mc-24 PROFI-ROM (Part.-Nr. 4831.660
From a TX mc-24 with MEGA-SOFT-ROM or
AUDIO -SOFT -ROM data can be transferre
transmitter with the new mc-24 PROFI-RO
in reve rse or der s a the model m emory is of differen
form at. Only the PROFI -ROM co
program.
D uring dat a t nsf r of a transmitt ra e
SOFT-ROM or from a PC with MEGA-SOF
data a warning window appears on the disp
the following announcment:
12 new functions
=>
Modell 05
mit Progr
= >
Umstellun
= >
Modell erst nach gründlicher
=>
Kontrolle aller Einstellungen benutzen!
=>
=>
=>
For this reason please note th
=>
Before you use a model with transfered program
data you must check in detail all functions
especially the mixing functions and switches in
use!
n
o
S equence of connecting
B efore you switch the
pe of
e stablish the connection to the PC or other
tr ansmitter using the interface cable. The reverse
o rder has to be used after the data has been copied
i.e. transmitter(s) "OFF" before disconnecting!
to b e noted:
fitte d with the
New menus:
AUDIO-

"Store changes permanently":

ding-
with the
).
d to a
M but not
t
"Undo changes":
ntains a converter
er with M EGA-
T-ROM
lay with
The two new menus allow the saving of program
changes just made or the undo of changes just
ASW 24
am mver ion unvertr glic s ä h
g bit e be t t s ätigen
JA
e following:
transmitter(s)"ON", first
Sollen die Programmänderungen
f est geschrieben werden?
JA NEIN
Sollen die Programmänderungen
rückgängig gemacht wer den?
JA NEIN
made which will set the program back to the state of
last save prior to the last changes made.
All data is saved by activation of "Store cha
permanently" or by changing the model
Code 11 » Model select «. Data is no lo
automatically saved when the transmitter is
switched"OFF".
When switching the transmitter "OFF" last changes
wi ll not be lost but as they are not saved in the
memory the undo function will jump to the memory
of the state when you last saved any changes.
"Back-up all models → PC":
Sollen alle Modelle
auf PC gesichert werden?
JA NEIN
and "Copy MC24 → external",
Other than the comm
all used mod el memories are automatically and
successively tranfered to the PC.
nges
memory in
nger