Code 53; Phase Trim; Phase Switches & Location; Trim With Rotary Selector - GRAUPNER mc-24 PROFI-ROM Manual

Phase switches & Location
A B C D E
2 3
After the allocation of the switches you can see in
Code 51 which flight phases can be recalled with
switch:
Phase 1 normal
Phase 2 Strecke
Phase 3 Landung
Phase 4
Name Flugph. Uhr Umsc
SEL SEL
It is of no consequence if you have more phase
names than switch positions. You can add switche
at any time and also add further phase names and
allocate further switc hes at any time.
Importan t notice:
All m odell adjustments made prior to the sele
a phase s witch are now contained in - „Phase 1
< normal> " (= switch middle). That also had the
effect tha t all model settings in flight dependant
menus fo r all other flight phases are in default
settings.
26 new functions

Code 53

Phase trim

Flight phase dependant trimming for AIL, EL, RUD
Phase-number
normal
&
F
Phase-na me
Strecke
Landung
1 normal
2 distance
3 landing
«normal »
a
This men u was created on special request of pilots
engaged in a
commo n item with the Code 52 standard-ROM is i
0.0s
name!
0.0s +
0.0s +
Was in t he standard version under item "phase -
0.0s -
trim" th e flight phase dependant positioning of
h. Zeit
aileron a nd camber flap in the same direction
SEL
adjusted - (Camber flap adjustments – now in the
new mu lti flap menu Code 71» Wing mixers «, page
28) - is here now – same as in the helicopter menu -
s
the pha se dependant trim on fixed wing model
all three axis
Code 53 allows the flight phase dependant
aileron, elevator and rudder.
ction of
Adjustments are made:
• With the rotary selector (1),
• With tr
im levers (2) or
•
With digital trim (3), if in Code 49 » Auxiliary
switch « the relevant trim switches have been
select ed, see page 20.
T he abo ve display ind
Code 51 » Phase adjustment « described example
The acti ve flight phase selected with the phase
switche s is displayed in the lower left.
0% 0% 0%
Trim. Pos
0% 0% 0%
2
0% 0% 0%
3
4
QR HR SR
erobatics and aero – tow . The only
possibl e.
trim of
ication is in relation to the in
0%

1. Trim with rotary selector

0%
Select t he desired flight phase. In the line marked by
0 %
a star you dia l in the requi
EL , or RUD after pressing the key under each
ST O
symbol. (You can also use the two switches INC(+)
and DE C(-) from Code 49 » Auxiliary switch «). Th
trim ran ge is from -125% to +125%. (
2. Trim ming with trim levers
ts
To find t he trim values during flight you can also use
the trim levers on the relevant control sticks for
ailero n, elevator and rudder. The storing
lever po sition is also possible in the active flight
phase:
A djust t he trim levers "Trim. 2...4" (2 = AILE, 3 =
ELEV, 4 = RUDD) during flight. The actual positi
are indicated in the right column of the display. To
s for
store the values just press the
window opens in the display:
normal 0%
Strecke 0%
Trimmung
Landung 0%
einste lle n
und EN ER T
QR
«normal »
Return the trim levers now to their mechanical
centre and press ENTER. In this moment the trim
values are saved into the active flight phase and the
.
trim values in the right column return to the centre
position (AILE = 0%,ELEV = 0%, RUDD = 0%):
red trim values for AIL ,
e
CLEAR = 0% ).
of the trim
ons
STO -key and a
0% 0%
Trim. Pos
0% 0%
2 - 4%
0% 0%
3 0%
+
4 5%
HR SR STO