Operating Instructions - Flex LBR 1506 VRA Original Operating Instructions

LBR 1506 VRA

Operating instructions

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
 Unpack the electric power tool and check
that no parts are missing or damaged.
 Attach the handle.
 Attaching the sanding belt.
Attach the handle
 Place the holder on the upper side
of the electric power tool and secure
with the screw.
 Place the handle on the thread of the holder
and turn handle clockwise.
 For certain applications the holder
or the handle can be rotated 180° and
attached.
Attaching or changing
the sanding belt
 Pull out the mains plug.
 Press rocker arm towards drive roller
and hold down (1.).
 Press locking pin (2.) and
 rotate locking pin 90° clockwise (3.).
 Release rocker arm.
The rocker arm is now locked.
`^rqflk>
lÄëÉêîÉ=íÜÉ=ëéÉÅáÑáÉÇ=êìååáåÖ=ÇáêÉÅíáçå=
çÑ=íÜÉ=ÄÉäí>=oìååáåÖ=ÇáêÉÅíáçå=ãìëí=ÅçêêÉëJ
éçåÇ=ïáíÜ=íÜÉ=~êêçï=çå=íÜÉ=ÖÉ~ê=ÜÉ~ÇK
 Remove attached sanding belt
(optional) (4.).
 Put sanding belt on the two rollers (5.).
 Check that the belt is placed fully
on the two rollers.
 Rotate locking pin by 90° and release
by briefly pressing the rocker arm.
15