Reference Voltages; Language Selection; Initialization - Leica CM3600 XP Instruction Manual

6. Software

6.5.4 Reference voltages

6.5.5 Language selection

6.5.6 Initialization

64
Indication of the current reference voltage in Volt.
Buttons 1 to 8
Clicking on these buttons changes the reference voltage. The individual
reference voltage values are predefined and cannot be changed. The
display will read the new selected value. Activated buttons will light up in
green.
The flag buttons indicate the languages that can be selected. Clicking on
one of the flag symbols changes the user interface to the corresponding
language.
Clicking on EXECUTE in the initialization field opens the „Main window"
and the INIT buton reappears in the 'Mode of operation' field.
Clicking on INIT opens the dialog box „Safety check - initialization". For
further information, refer to chapter 6.3.
Instruction manual V 6.1 - 07/2007