Set-Up Wizard - Nordmende Transita 120 IR Instruction Manual

You can also use the WPS function in the network wizard. To do this first select a WLAN
network and then select the Press the button option or PIN. You can otherwise use
Skip WPS to reach manual password entry.
To find out more about the current connection select Settings.
Select Manual setting, if you know your network parameters and would like to
configure them manually. Take note of the instructions on the display.
Select Delete network profile, to delete connections no longer required.

10.8 Set-up wizard

Press the MENU button and then select Main Menu > System Settings > Set-up
>
Wizard.
When switching on for the first time the set-up wizard starts automatically.
First select the display language and then >YES as soon as Perform now is shown in
>
the display.
If you select NO, the wizard closes and you must perform the required settings manually.
You will be taken through the settings in various steps.
> Under Time format, select the desired display format for the time display (Section
10.2).
> During the next step you must select via which source the time is to be synchronised
with (for more information refer to Section 10.2).
> Then select the current time zone and whether it is currently summer time or winter
time.
Press the Scroll&Select/Snooze knob to close the assistant while Set-up assistant
>
closed appears on the display.
Page 72