Using Headphones; Visual Display; Playback Modes; Dab / Dab+ Radio - Nordmende Transita 120 IR Instruction Manual

7.4 Using headphones

Warning about suffering hearing damage!
Do not listen to the radio at a high volume with headphones. This can cause permanent hearing
damage. Before using headphones turn down the device loudness to its minimum. When you
attach headphones (not in the scope of delivery), the device's speaker is muted.
> Only use headphones with a 3.5 mm stereo jack plug.
Insert the headphone jack into the headphone socket on the back of the device.
>
Sound is now played exclusively through the headphones.
> If you would wish to use the speakers again, unplug the headphones from the
headphone jack on the device.
7.5 Visual displays
Current source
Station name,
track, artist,
additional info,
menu, lists
Depending on the selected function/source, the visual display shown may vary. Take
note of the instructions on the display.

8 Playback modes

Your device has different possible reception routes for playback. These are described below.
Press the MODE button to switch between the individual modes.
>

8.1 DAB / DAB+ radio

8.1.1. What is DAB?

DAB is a new digital format that delivers crystal-clear sound in CD quality. So even if you're in
the car or on the train, you can still enjoy good, noiseless reception. DAB broadcast uses a high-
speed datastream in the radio channel. In contrast with conventional analogue radio stations,
with DAB a number of stations are transmitting on the one and the same frequency. This is
referred to as an ensemble or multiplex. An ensemble consists of the radio station as well as a
number of service component or data services which are sent individually by the radio stations.
Time
Status bar
Page 59
DE
EN
NL
FR
PL