Selecting Dab/Dab + Mode; Station Search (Auto); Checking The Reception Strength; Play A Station - Nordmende Transita 120 IR Instruction Manual

8.1.2 Selecting DAB/DAB + mode

To select DAB mode, press the MODE button until DAB appears on the display. If
>
the radio is being switched on for the very first time, a complete search is performed
automatically for DAB radio station(s).
8.1.3 Station search (automatic)
> To restart scanning, open the menu by pressing the MENU button.
Now select the menu item <Full search> by turning the SCROLL/SELECT/SNOOZE
>
knob and confirm your selection by pressing on the SCROLL/SELECT/SNOOZE knob.
Then scanning starts over all transponders. The scan progress is shown on the display.

8.1.4 Checking the reception strength

To check the reception strength of a station, press the INFO, button until the reception
>
bar is shown in the display:
Proceed as follows to check the reception strength of an individual transponder:
Press the MENU button and select the entry <Select manually> by turning the
>
SCROLL/SELECT/SNOOZE knob. Then press the SCROLL/SELECT/SNOOZE knob.
Select a channel by turning the SCROLL/SELECT/SNOOZE knob and press the
>
SCROLL/SELECT/SNOOZE knob, to show the reception strength of this channel.
8.1.5 Playing a station
To play a station, turn the SCROLL/SELECT/SNOOZE knob, until the station name
>
appears in the display.
Minimum Signal Strength
Signal Strength
DE
EN
NL
FR
PL
Page 61