Setting The Grind Level; Menu Settings; Setting The Language - Electrolux ECG6600 User Manual

822_949_354 ECG6600_Elux.book Seite 126 Donnerstag, 23. August 2007 7:58 19
g
been dispensed, dispensing stops auto-
matically.
For a few seconds the display shows
«PLEASE WAIT...». After that the
appliance is ready to make coffee
again and the last selected coffee set-
ting appears on the display.
The appliance is set to a normal quantity
3
at the factory. You can change and save
this to what you want, see „Setting the
hot water programme (programming
dispensing quantity)" page 130.
It is not recommended to pour off hot
3
water for longer than 2 minutes with-
out a break.
0 You can stop hot water from dispens-
ing at any time. To do so, press the "hot
water" button again
12

Setting the grind level

The mill mechanism is set at the fac-
tory to a medium grind level. If coffee
is dispensed too quickly or too slowly
(in drips), you can change the grind
level during the milling process.
The grind level can only be changed
1
during the milling process. Changing
the settings when the mill mecha-
nism is at rest can damage the coffee
machine.
0 Adjust the grind level with the knob
for setting the grind level (Figure 2, T)
(Figure 12).
• If the coffee only comes out in drips
or not at all, the knob must be
turned by one position clockwise.
Turn one position at a time until
coffee is dispensed satisfactorily.
• If the coffee comes out too fast and
the crema does not meet your taste,
turn the knob by one position anti-
clockwise.
Make sure that you do not turn the
3
knob for setting the grind level too far,
as otherwise coffee may come out in
drips when dispensing 2 cups.
126
3
13
(Figure 32).

13.1 Setting the language

0 Press the "MENU" button (Figure 5).
0 Confirm the menu option with the
0 Press the scrolling buttons "<" or ">"
0 When the desired language is dis-
3
0 To go back to the coffee mode, press
You will only notice the effect of these
corrections after at least 2 more cof-
fees have been made, however.
Removing foreign bodies in the mill
mechanism.
Foreign bodies in the mill mechanism,
such as small stones, can damage the
mechanism. A foreign body in the cof-
fee causes an even rattling noise. If you
hear this noise during the milling pro-
cess, switch the appliance off immedi-
ately and consult customer services.
Blocking or damage caused by for-
eign objects in the grinder might be
excluded from the guarantee.

Menu settings

You can choose between several langu-
ages. A different language can be
selected as follows:
The menu option «CHOOSE LAN-
GUAGE» appears.
"OK" button (Figure 6). The language
set appears on the display.
(Figure 6) until desired language
appears.
played, confirm it with the"OK" button
(Figure 6). This language is program-
med in accordingly.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
to the menu option «CHOOSE LAN-
GUAGE» after programming.
the "MENU" button (Figure 5)or wait
about 120 seconds until the appliance
automatically jumps back to coffee
mode.