PRE-ASSEMBLY:
Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in
conjunction
with the assembly instructions.
For your safety and ease, assembly by two adults is recommended.
Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care as some
parts or hardware may have sharp points or edges.
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to
misalign during assembly.
The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.
PARTS INCLUDED:
(A) Upper Bed (Short) - 2pcs
(B) Lower Bed (Long) (L/R) - 2pcs
(C) Side Rail-4pcs
(D) Guardrail-Short - 1pc
(E) Guardrail-Long - 1pc
(F) Ladder - 1pc
(G) Small Finials - 2pcs
(H) Finials - 4pcs
(I) Spacer - 2pcs
(J) Bed Slats-Short - 1sets
(K) Bed Slats-Long - 1sets
HARDWARE INCLUDED:
(L) JCBC 6 x 110mm - 16pcs
(M) JCBC 8 x 16mm - 2pcs
(N) Flat washer - 16pcs
(O) Barrel Nuts - 16pcs
(P) Ø10 x Ø8 x 100mm Iron Dowel - 2pcs
(Q) #8 x 32mm Round Head Screw-64pcs
(R) #8 x 19mm Flat Head Screw - 17pcs
(S) 4mm Allen key - 1pc
TOOLS REQUIRED:
Phillips head screwdriver (not included)
Date: 7-December-2011
Rev:
E
B
A
C
H
G
I
F
Page 2 of 7
D
Need help?
Do you have a question about the CATALINA COTTAGE T/F BUNK BED and is the answer not in the manual?