pottery barn kids Carolina Grow With You Craft Assembly Instructions

PRE-ASSEMBLY:

•
Please read all instructions before beginning assembly.
•
For your safety and ease, assembly by two adults is recommended.
•
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will
avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
•
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
•
Use the parts and hardware lists to identify and separate each of the pieces included.
•
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
•
The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

HARDWARE INCLUDED:

(D) Wrench – 1pc
ASSEMBLY INSTRUCTIONS:
1. Place Tabletop (A) upside down on a soft, scratch free surface. Attach a Leg (B) to one corner and secure it
with a Flat Washer (G), Spring Washer (F) and Nut (E) onto each hanger bolt from the other end as shown
below. Repeat with the other (3) legs.
B.
Date: 14-May-2012
pottery barn kids
Carolina Grow With You Craft Table
B.
(E) Nut 5/16" – 4pcs
B.
A.
B.
A.
(F) Spring Washer – 4pcs
B.
Page 1/2

PARTS INCLUDED:

(A) Tabletop – 1pc
(B) Leg – 4pcs
(C) Paper Rod – 1pc
C.
B.
B.
(G) Flat Washer – 4pcs
G.
F.
E.
B.
D.