Summary of Contents for pottery barn kids CATALINA STORAGE DESK
Page 1
CATALINA STORAGE DESK PRE-ASSEMBLY: Please read all instructions before beginning assembly. For your safety and ease, assembly by two adults is recommended. Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly.
PARTS INCLUDED: Top - 1 pc - A Left End Panel - 1 pc - B Right End Panel - 1 pc - C Turning Legs - 4 pcs – D HARDWARE INCLUDED: (E) M6 x 25 mm Bolts – 8 pcs (F) M6 Lock washers - 8 pcs (G) Allen key(4mm) –...
Page 3
ASSEMBLY INSTRUCTIONS Note: align inner arrow at center of cam houses with outer arrow of cam prior to insertion into the countersunk. 1. Put all furniture parts on a soft, scratch free surface such as a carpet or rug. Remove drawers from Top(A) as shown below.
Page 4
Lay Desk Top(A) upside down. Put a Cam House (J) into notch at the back of back rail, ensure arrows on the cam house pointing at pre-drilled hole in the notch for cam house. Align wooden dowels and Cam Stud on Left End Panel (B) with pre-drilled holes in under top frame of the desk top, tighten cam house with Allen Key (H) as shown below.
Page 5
Insert Bolts (E) with lock washers (F) through pre-drilled holes from inside end panel of drawer compartment into metal inserts in right end panel (C), tighten bolts with Allen Key (G) when they all in place. Attach Turning Legs (D) to Left and Right End Panels (B&C) as shown below.
7. Slowly turn the Storage desk upright with a helper and place the drawers back, please look the back of drawer boxes and put the one labeled with top to the top right compartment. Adjust levelers under legs to balance the desk if necessary.