pottery barn kids Carolina Craft Table Two Drawer Manual

PRE-ASSEMBLY:

•
Please read all instructions before beginning assembly.
•
For your safety and ease, assembly by two adults is recommended.
•
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will
avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
•
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
•
Use the parts and hardware lists to identify and separate each of the pieces included.
•
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
•
The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

HARDWARE INCLUDED:

(D) Wrench – 1pc

ASSEMBLY INSTRUCTIONS:

1. Place Desktop (A) upside down on a soft, scratch free surface. Attach a Leg (B) to one corner and secure it
with a Flat Washer (G), Spring Washer (F), Nut (E) and Wrench (D) on each hanger bolt as shown below.
Repeat with the other (3) legs.
B.
pottery barn kids
Carolina Craft Table Two Drawer
B.
B.
(E) Nut 5/16" – 8pcs
B.
A.
A.
B.
(F) Spring Washer – 8pcs
B.
Page 1/2

PARTS INCLUDED:

(A) Tabletop – 1pc
(B) Leg – 4pcs
(C) Paper Rod -1pc
C.
B.
(G) Flat Washer – 8pcs
G.
F.
E.
B.
D.