Kramer VIA Campus2 PLUS Quick Start Manual page 2

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VIA Campus² PLUS. For best results, we
recommend that you always use Kramer high-performance cables to connect AV equipment to VIA Campus² PLUS.
1. Connect the keyboard and mouse.
2. Connect an HDMI display and/or a DisplayPort display.
3. Connect a laptop or other HDMI source.
4. Connect a Local Area Network (LAN) cable for connection to your network.
5. Connect the Wi-Fi antennas for using the built-in wireless capability.
6. Connect powered speakers and a microphone.
Step 5: Connect the power
Connect the 19V DC power adapter to VIA Campus² PLUS and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com
Caution:
• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
Step 6: Configure VIA Campus² PLUS
A wizard guides you through configuration. If you choose to skip the wizard, follow these steps for configuration:
1. On the Kramer VIA dashboard, click Features > Settings.
2. Enter the User Name (default = su) and Password (default = supass) and
click Login.
The VIA Settings window appears.
3. Define the relevant VIA settings:
▪ LAN Settings – Configure your network parameters and apply
settings (DHCP is enabled by default).
▪ System Controls – Manage your display and audio settings, run
control panel, select your language, etc.
▪ Third Party Apps –Install/remove third party software applications.
4. Click Apply and then click Reboot to apply all settings. For more details,
see the VIA Campus² PLUS User Manual.
for updated safety information)