Table of Contents
Advertisement
Preamble
Before using this device, please read this manual carefully and keep it for future reference.
Important safety instructions
Before connecting the device, check that the mains voltage matches the marking plate (8) (100-120V~
•
or 220-240V~ 50-60Hz) on the side of the device.
•
To avoid a risk of electric shock, the device must only be connected to a power supply network
equipped with a protective earth.
•
The device must be installed in a room that meets the installation standards in force in the country.
•
Make sure that the power cord cannot be walked on or pinched particularly at plug, connector, and
the point where they exit from the apparatus.
•
Unplug the device during lightning storms or when unused for long period of time.
•
Only use the original cable supplied with the device.
•
In case of replacement of the power cord, use a power cord with the same characteristics assigned and
meets the standards in force in the country.
The power cord is intended for use only with this device and must not be used with any other
•
electrical appliance.
•
Before any intervention, switch OFF the unit by disconnecting the power cord.
•
Dangerous voltages remain in the device even after switching off the switch, the mains cable serves as
a disconnection. Disconnect the unit with the power cord before doing any work.
•
The female connector on the power cord is used for disconnection, and must always be easily
accessible.
•
To reduce the risk of fire or electric shock,
-
Do not expose the unit to rain or moisture;
-
Do not place objects filled with liquids (vases, etc.) on or near the device;
-
Do not place the device near other sources of heat.
•
Before transporting or storing, check that the device is cold.
•
Non-stick surfaces become hot during operation. Never touch hot parts. Keep children away.
•
For assistance in mounting, operating or maintaining the device, contact your KINETEC® distributor.
•
Modifying the device in any way is strictly forbidden.
•
If the device is used in a manner not specified in this user manual, the protection provided by the
device may be compromised.
•
Before use, check that the device is not damaged particularly the non-stick surfaces. In the event of
chock or trace of impact, contact your KINETEC® distributor.
EN
2/12
Advertisement
Table of Contents
