Summary of Contents for WATSON Tonic Center Screen
Page 1
Tonic Center Screen Assembly Instructions Tools Required Cordless drill, magnetic insert-bit holder ITEM NO. COMPONENT TONIC BENCH INFILL PANEL CENTER SCREEN ASSEMBLY 5/16-18 x 1 ¼” SHCS BUTTON HEAD SCREWS Step 1 – Install one bolt Lay the screen assembly on its side on a work surface. Position it so that the bottom edge (with the brackets) is hanging over the edge of the work surface slightly.
Page 2
Tonic Center Screen Assembly Instructions Step 2 – Install second bolt Lift the screen and align the second hole in the panel with the hole in the second bracket. Thread the second bolt. Tighten both bolts Figure 2 Step 3 – Place screen / infill assembly onto bench...