Connecting Circulation Pump - Galmet Basic Series Installation And Operation Manual

4. Technical description

4.9. Connecting circulation pump

Plug circulation pump to the connector marked as no. 8.
For stranded conductors, use sleeves or tin plating.
It is required to turn the circulation pump on and configure it using the heat pump's controller. Keep in mind that if circulation pump is on, it
affects heat energy losses from the heater.
Before taking any action, it is required to disconnect the device from power supply. Electrical wiring connections should be carried out by a
qualified electrician.
40 Installation and operation manual of the Basic heat pump
8
© All rights reserved - Galmet Sp. z o.o. Sp. K