Connections; Disassembly Of The Controller - Galmet Basic Series Installation And Operation Manual

4. Technical description

4.2. Connections

DHW GW 1"
Coil supply GW 1"
Circulation GW 3/4"
Sensor cover R 3/8"
Coil return GW 1"
Cold water supply
Water drain GW 1"
Basic 200 / Basic 270 with 1 coil / Basic 300
To empty the tank filled with water from cold water supply it is required to install three-way valve.
4.3. Controller disassembly
2
3
34 Installation and operation manual of the Basic heat pump
4 5
DHW GW 1"
Coil supply GW 1"
Sensor cover R 3/8"
Coil return GW 1"
Circulation GW 3/8"
Coil supply GW 1"
Sensor cover R 3/8"
Coil return GW 1"
Cold water supply
Water drain GW 1"
Basic 270 with 2 coils.
1. Unplug power supply of the device
2. Remove the plug
3. Unscrew 2 screws
4. Move the controller forward
5. Unplug electrical connectors (cubes)
connected to the back part of the controller
© All rights reserved - Galmet Sp. z o.o. Sp. K