Technical Description; Heat Pump's Connections / Overall Specification - Galmet Basic Series Installation And Operation Manual

4. Technical description

4.1. Heat pump's connections / overall specification

Example for Basic 200 model:
Condensate drain
Hydraulic connections
Sensor cover
1
Condensate's hose is located on the back of the device. It should be placed so that the condensate could flow freely. Drain should be ensured
for the condensate, such as air-trap or floor drain.
Designed for DHW sensor controller of additional heat source, e.g. boiler.
1
Place to which optional circulation pump (8) and additional source pump (7) is connected. Detailed description of the installation found further on in the
2
instruction.
© All rights reserved - Galmet Sp. z o.o. Sp. K
4. Technical description
Installation and operation manual of the Basic heat pump
Electrical connectors
Fan
Evaporator
Compressor
Expansion valve
Low pressure switch
Filter
High pressure switch
33