The Control Panel
1 "Memory" buttons and
corresponding pilot lights
A washing and/or drying programme can be stored or
recalled by pressing these buttons.
To store: select the required programme using the
various buttons available (see section "Operating
sequence"), then start the machine by pressing the
START/PAUSE button. Only then can the programme
be stored by pressing one of the "Memory" buttons until
the corresponding pilot light comes on.
If the "Memory" button pressed does not yet have a
programme stored, the pilot light flashes for two
A stored programme can be modified by pressing the
required buttons before starting the machine with the
To recall a programme: press the required "Memory"
button; the pilot lights corresponding to the stored
programme come on. Press the START/PAUSE button
to start the machine.
Warning! A programme may have been stored during
testing in the factory.
Note: It is advisable to make a note of the programme
stored for each "Memory" button.
2 ON/OFF-Cancel button
This button has two functions:
- switch the machine on/off
- cancel a programme which is running
Press the button to switch the machine on, press it again
to switch the machine off or to cancel a programme
which is running.
3 "Fabrics" button
Press this button to select the type of wash required:
White cotton, Synthetic, etc. The pilot light
corresponding to the type of wash selected comes on
and the washing time flashes on the display (9); time is
calculated on the basis of a maximum load of 5 kg for
cotton, 2 kg for delicate and synthetics and 1 kg for wool.
The machine automatically selects the maximum
temperature and spin speed based on the type of wash
selected: the corresponding pilot lights come on.
These values can be decreased by pressing the
TEMPERATURE and SPIN SPEED buttons.
The "Fabrics" button cannot be used when the following
programmes are selected:
8 9 10 11 12