Use; Control Panel; Controls - Zanussi WD 802 User Manual

Use

Control panel

TURBODRY 800
BLANCOS A B 60°- 90°
B
COLORES A
C
ACLARADOS
CENTRIFUGADO D
GUARDAR PLANCHAR
kg 2.5 90' 70'
kg 1 60' 50'
1 Programme guide
2 Drying time selector dial
Graduated up to 120 mins for cottons (black section)
and synthetics (grey section), this dial allows you to
select the desired drying time according to the type
and quantity of laundry and the required degree of
dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of
drying and this phase must in no circumstances be
reduced or interrupted.
3 Drying indicator light
This light illuminates when the machine is drying.
4 Mains-on light
This light illuminates when the machine starts
working and goes out when the ON/OFF button is
released.
SINTETICOS G H 30°- 60°
40°- 60° LANA L 30°- 40°
M
DELICADOS 30°- 40°
J
CENTRIFUGADO
N
ACLARADOS
DESCARGA P
ALGODON GUARDAR SINTETICOS
F K
kg 2 110'
F K
kg 1 70'
1 2 3 4 5 6
5 On/Off button
By depressing this button the machine starts
operating.
When depressed again, the machine stops.
6 Quick wash button
By depressing this button on cotton and synthetic
programmes the washing time will be reduced by
approx. 30 mins for cotton from COLD
and by 15 mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
7 Temperature selector dial
Turn this dial clockwise or anti-clockwise to select
the required temperature.
Position
means that the machine will wash with
cold water.
8 Programme selector dial
Turn the dial clockwise to select the required wash
and drying programme.
Before setting the dial to any position the machine
must be switched off by depressing the ON/OFF
button again.
10
7 8
to 60°C
WD 802